OEM · ODM · Private Label
If you can specify it, RHEA LED Linear can manufacture it.
Aluminium extrusion, LED strip, and neon flex production out of our facility built to architectural specification, not pulled from a catalogue. OEM, ODM, and private-label manufacturing for lighting brands, distributors, and product makers, direct from the floor since 2011.
Manufacturing Capabilities
Built to your drawing, not our default
Standard configurations cover most projects. When they don’t, these are the variables our engineering team routinely changes.
Custom Profiles
New extrusion tooling for a specific cross-section or diffuser geometry.
Custom Lengths
Non-standard reel and bar lengths to match a project’s exact run.
Custom Optics
Beam angle, diffusion, and glare control tuned to the installation.
Custom CCT / CRI
Colour temperature and colour-rendering targets built to spec.
Custom Finishes
Anodised, powder-coated, and painted finishes in project-matched colour.
Custom Electronics
Drivers and control protocols matched to your building management system.
OEM / ODM Development
Full product development under your brand design, tooling, documentation, and packaging.
Volume Engineering
Design-for-manufacture review to hold spec and cost at project scale.
Who We Build For
Two kinds of partner, one factory
Every OEM relationship starts in one of two places both run through the same engineering and production floor.
An embedded light engine, built to your product
You build the finished product the appliance, the fixture, the cabinet and need a light source engineered to fit it: a defined thermal envelope, a fixed driver voltage, a specific mounting geometry.
- We engineer the LED module, optics, and driver to your enclosure, not the other way around
- Thermal and photometric validation against your product’s operating conditions
- Supplied as a ready-to-assemble sub-component, to your part number and documentation
Example: a refrigeration light engine built to a thermal envelope.
A complete range, under your own name
You sell lighting under your own brand and need a manufacturing partner behind it profile, strip, neon, wall washer, or architectural packaged, labelled, and documented as your own catalogue.
- Full private-label production across all five product segments
- Your logo, your packaging, your catalogue and specification sheets
- Manufacturer-direct pricing with no intermediary markup
Example: a private-label profile and strip range for your catalogue.
For Product Manufacturers
Does your product need light built into it?
If light is a functional part of the product you manufacture, we engineer the light engine to your enclosure a defined thermal envelope, a fixed driver voltage, a specific mounting geometry and supply it as a ready-to-fit component under your part number.
Appliances & White Goods
Refrigeration, cold-chain display, ovens, range hoods CCT and thermal-rated engines.
Furniture & Cabinetry
Wardrobe, kitchen, vanity and display joinery — slim recessed engines with sensors.
Fixtures & Luminaires
OEM modules for fixture makers who want the light source engineered, not sourced.
Equipment & Enclosures
Medical, retail, transport and industrial housings needing an integrated light source.
Product Categories
What we manufacture
Five segments, produced to your specification and shipped under your brand profile, strip, neon flex, wall washers, and architectural fixtures.
LED Aluminium Profiles
2,500+ profiles · 24 families · AL6063-T5Surface, recessed, drywall-trimless, waterproof, bendable, magnetic, handrail, and custom extrusions.
Profile lighting
LED Strip Lights
200+ configurations · 11 familiesCOB and SMD, high-CRI to IP68, bendable, RGBW, cold-chain private-label or manufacturer-direct.
Strip lighting
LED Neon Flex
150+ modelsSilicone-body flexible neon top-bend, side-bend, 360°, RGB and addressable for facades and signage.
Neon flex
Flexi Wall Washers
Symmetric & asymmetric · indoor / outdoorFlexible and rigid wall-washing systems with asymmetric beams for even facade and feature-wall grazing.
Wall washers
Architectural Lighting
Any shape, any length · up to 20m diameterRings, arcs, and suspended linear fixtures smart architectural systems with DMX and addressable control.
Architectural lightingFrom Concept to Production
How a specification becomes a shipment
Design
Your drawing, spec, or concept reviewed with our engineering team.
Engineering
Cross-section, optics, and electronics engineered to the brief.
Prototyping
Sample extrusion and build for sign-off before tooling.
Testing
Photometric, thermal, and IP validation against target spec.
Manufacturing
Volume production with batch-to-batch consistency.
Quality Control
In-line and final inspection to the approved specification.
Global Supply
Packaged under your brand and shipped to 50+ countries.
Private Label
We manufacture with your logo, for you
your catalogue
OEM, ODM, and private-label manufacturing
We produce complete lighting products profile, strip, neon, or a combination engineered, packaged, labelled, and documented under your brand rather than ours. Established lighting companies have sold RHEA LED Linear-built product under their own names since 2011; that same manufacturing depth is available to you direct.
Common Questions
What specifiers and brands ask first
What does OEM, ODM and private-label manufacturing mean?
OEM: you supply the design or specification and we build to it. ODM: we supply the design and you brand it. Private label: a complete range packaged and documented as your own catalogue. RHEA LED Linear offers all three, since 2011.
Can you build a light source into the product I manufacture?
Yes. For product manufacturers appliances, fixtures, furniture, equipment we engineer an embedded light engine to your enclosure: a defined thermal envelope, a fixed driver voltage, and a specific mounting geometry. It is validated against your product’s operating conditions and supplied as a ready-to-fit sub-component under your own part number.
Can you manufacture a custom profile or product to my drawing?
Yes. We cut new extrusion tooling to your cross-section and build to your optics, CCT/CRI, finish, electronics, and length the eight variables our engineering team routinely changes when a standard configuration doesn’t fit.
What is the manufacturing process?
Seven stages: Design, Engineering, Prototyping, Testing, Manufacturing, Quality Control, and Global Supply from your drawing to product shipped under your brand to 50+ countries.
What products can you manufacture?
Five segments: LED aluminium profiles (2,500+ across 24 families), LED strip (200+ configurations, 11 families), LED neon flex (150+ models), flexi wall washers, and architectural lighting individually or as a combined private-label range.
What are the five product segments RHEA LED Linear manufactures?
1. LED Aluminium Profiles 2,500+ profiles across 24 families in AL6063-T5. 2. LED Strip Lights COB and SMD, high-CRI to IP68. 3. LED Neon Flex silicone-body flexible neon for facades and signage. 4. Flexi Wall Washers flexible and rigid wall-washing systems with asymmetric optics. 5. Architectural Lighting shaped, arc, and suspended systems with DMX and addressable control. Each is available OEM, ODM, or private-label.
Do you sell manufacturer-direct to architects and project buyers?
Yes. Specification support and manufacturer-direct pricing are available alongside OEM and private-label manufacturing, with no intermediary markup.
Start a Project