OEM · ODM · Private Label
Build your own Brand of Profile Lighting
Profile, strip, neon, or a combination packaged, labelled, and documented as your own catalogue, at industrial volumes with the batch-to-batch consistency serious manufacturing demands. 2,500+ aluminium profiles across 24 families, extruded in AL6063-T5, under your name.
Who We Manufacture For
Two kinds of partner, one factory
Every private-label or OEM relationship starts in one of two places. Both run through the same engineering and extrusion floor in Bangalore.
An embedded light engine, built to your product
You build the finished product the furniture, the fixture, the facade element and need a profile and light source engineered to fit it: a defined section, a fixed driver voltage, a specific mounting geometry.
Example a custom cove extrusion built to a ceiling detail.
A complete range, under your own name
You sell lighting under your own brand and need a manufacturing partner behind it profile, strip, neon, or a combination packaged, labelled, and documented as your own catalogue.
Example a private-label profile and strip range for your catalogue.
Track Record
Already installed under brands architects trust
RHEA has operated as an OEM and white-label manufacturer since 2011, extruding LED aluminium profiles under the brand names of established lighting companies across 50+ countries. We are now building direct recognition offering that same manufacturing depth straight to architects, lighting designers, and project buyers, at manufacturer-direct pricing.
Five-Star Hospitality
Installed under partner brands in five-star hotels and resort properties.
Commercial Developments
Specified into retail, office, and mixed-use commercial projects.
Public Infrastructure
Deployed in public and civic infrastructure projects across served markets.
The Profile Range
24 profile families within the 2,500+ configurations
Every family is extruded in AL6063-T5, then specified for one job a trimless ceiling, a wet facade, a curved cove, a walk-over floor, a handrail. Widths from 4mm to 250mm, IP20 to IP67.
Recessed / Drywall
Plaster-in trimless light lines
Surface / Regular
Fast cove, ceiling, wall runs
Mini / Slim
Narrow reveals and details
Waterproof
IP65–IP67 wet and outdoor
Bendable / Wave
Curved and circular coves
Magnetic
Reconfigurable track systems
Handrail
Illuminated rails for stairs
Staircase
Anti-glare step lighting
Floor / In-Ground
Walk-over, load-bearing
Skirting
Architectural baseboard
Wardrobe / Furniture
Ultra-slim joinery profiles
Curtain / Cove
Pelmet and curtain pocket
Refrigeration
Cold-room rated
Tubular / Ring
Suspended rings and tubes
Smart Arc
Shaped feature systems
SuperCove
Modular tiltable cove
Lensed
15°–60° beam control
Decorative
Corners and niches
Free Assemble
X / L / T junctions
Economic
Volume and value projects
Drywall Trimless
Seamless gypsum integration
Tubular
Pendant and suspended
In-Ground IP67
Landscape and driveway
Custom Extrusion
Your section, your die
Furniture & Cabinet Lighting
Light engineered into the cabinetry itself
For furniture makers, kitchen and wardrobe brands, and joinery contractors who build the product and need the light source engineered to fit it a slim profile seated in a reveal, a sensor-switched wardrobe rail, a warm under-cabinet wash. We extrude the profile to your groove, match the CCT to your finish, and ship it labelled as yours.
Wardrobe & Closet
Ultra-slim 13×13mm and recessed rail profiles with PIR sensor and door-switch options, seated flush into shelving and hanging rails.
Kitchen & Under-Cabinet
Warm, high-CRI under-cabinet and plinth profiles, plus Gola / handleless skirting profiles that light the worktop without a visible fixture.
Display & Joinery
Furniture-reveal and shelf profiles for retail display, vanity units, and bespoke cabinetry COB for dot-free close-range light behind clear diffusers.
Your groove, your finish, your label
Send the cabinet section or the reveal dimension; we match the profile width, diffuser, and mounting to it, anodised or powder-coated to your finish, documented as your own SKU.
AL6063-T5 · 4–30mm furniture widths · 12V/24V · opal or clear diffuser
Driver, sensor, and connector included
Low-voltage drivers sized to the run, PIR and hand-wave sensors, and X / L / T connectors for continuous lines around a carcass a complete kit, not just extrusion.
Sensor-switched · dimmable · continuous-run connectors
Gola Profile Lighting the lit handleless kitchen
Gola (handleless) kitchens replace the handle with a recessed finger channel between cabinets. Seat a warm, high-CRI profile into that channel and the worktop lights itself no visible fixture, no handle, just a clean line of light along the cabinetry. We extrude the Gola J- and L-profiles to your carcass system, in matched finishes, with drivers and connectors for continuous horizontal and vertical runs.
- J-profile, L-profile, and C-profile Gola sections
- Warm 2700K–3000K, Ra90+ for true worktop and food colour
- Finish-matched to the cabinet: anodised, black, white, or custom
- Private-label and OEM for kitchen and joinery brands
Common Questions
What specifiers and buyers ask first
Can I get LED aluminium profiles made under my own brand?
Yes. RHEA produces complete profile-lighting products extruded, finished, packaged, labelled, and documented under your brand name rather than its own. We have manufactured under established lighting brands since 2011, and now also sell manufacturer-direct.
Can you extrude a custom profile section for my product?
Yes. With in-house tooling we cut custom dies to your cross-section width, height, diffuser seat, and mounting geometry for project-specific and private-label ranges.
What aluminium grade are RHEA profiles made from?
AL6063-T5 architectural-grade aluminium, anodised or powder-coated. It is the standard alloy for structural and architectural extrusions for its strength, corrosion resistance, and finish quality.
What is the difference between OEM, ODM and private label?
OEM: you supply the design or specification and we build to it. ODM: we supply the design and you brand it. Private label: a complete range packaged and documented as your own catalogue. RHEA offers all three.
What is Gola profile lighting for kitchens?
Gola (handleless) kitchens use a recessed finger channel between cabinets instead of a handle. A Gola lighting profile seats a warm, high-CRI LED into that channel so the worktop is lit by a clean line with no visible fixture. RHEA extrudes J-, L-, and C-profile Gola sections in finish-matched aluminium for kitchen and joinery brands, private-label.
Do you make furniture and cabinet lighting?
Yes. We supply slim furniture and wardrobe profiles (from 4mm), under-cabinet and plinth profiles, and Gola skirting profiles, with PIR or door-switch sensors, low-voltage drivers, and connectors engineered to seat into your cabinetry and labelled as your own product.
What sizes and IP ratings are available?
Profile widths run from 4mm to 250mm, in standard lengths up to 3m with custom runs for large projects, rated IP20 to IP67 across indoor, wet-area, outdoor, and walk-over applications.
Which countries do you ship to?
Products RHEA manufactures are installed in 50+ countries across the GCC, Europe, Asia, Australia, and the United States.
Start a Project