Wash the façade. Follow every curve.
Soft, bendable LED wall washers for façades, landmarks and gallery walls 10°, 30° and 45° beams, symmetric or asymmetric, IP67, and manufactured to your output, colour and length.
One flexible wall washer family, three ways to bend it
Every wall washer is a continuous, soft-bendable run that hugs the surface it lights specified by the way it needs to curve. Each is cut to your length and built across our flexi wall washer line.
Side Bend
Curves left-and-right along the wall plane for coves, perimeters and radii that follow a façade or floor line.
Top Bend
Curves up-and-over the emitting face for parapets, reveals and the beam families (2835C 10°/30°/45°, 3535 RGB/RGBW).
3D Bend
Bends on multiple axes at once for domes, columns and free-form architecture a single-plane washer can’t follow.
A real beam, not just a glow
Where neon and strip diffuse light softly, a wall washer throws it evenly up a surface from one to ten metres. Lensed optics give you a defined, repeatable beam that grazes texture or floods a plane.
- Symmetric and asymmetric distributions over 10 beam angles
- Silicone-encapsulated body with a PC lens, PU-coated
- Tunable white 1800K–6500K, plus RGB and RGBW
Rigid washers stop at the first curve. These don’t.
A flexible wall washer gives you the throw and beam control of an architectural washer, in a body that bends to the building instead of fighting it.
Soft 3D bendable
Follows curved façades, columns, domes and coves without faceting or breaks in the line of light.
IP67 weatherproof
Silicone-encapsulated and rated for façades, landscapes and wet exteriors; IP22 options for interiors.
Directional beam
10°–45° symmetric or asymmetric optics place light where it’s wanted graze, wash or flood.
Colour & control
1800K–6500K tunable white, RGB and RGBW, with dimmable, flicker-free and DMX512 control.
Cut to length
Marked cut points let runs be trimmed to the exact span of the wall, parapet or cove.
Low-profile mount
Semi-circular or square PC cover on stainless clips or aluminium profile super-slim options from 4 mm.
Your wall washer, built on our line beam, body and brand.
Don’t source wall washers. Commission them.
If you can specify it the beam angle, the output, the bend, the CCT or colour, the branding on the reel RHEA LED Linear can manufacture it. We build flexible wall washers under your name and to your drawing, not just off a catalogue.
- Custom beam optics, output and bend geometry to your detail
- Tunable white, RGB, RGBW and DMX512 control to your scheme
- Private-label packaging, printed reels and documentation
- Wall-wash engines embedded into your own fixture or product
- Manufacturer-direct pricing and lead times no middle layer
Build your own brand of
Flexi Wall Washers
Soft, bendable linear light for façades, landmarks and gallery walls, with 10°, 30° and 45° beams manufactured, packaged and documented under your name.
Specified by the people who light landmarks
Flexible wall washers earn their place wherever a surface has to be lit evenly, outdoors, and around a curve.
From your elevation to a packed reel
A clear, manufacturer-direct path the same process whether you need one feature wall or a project-wide quantity.
Specify
Send the beam angle, output, bend direction, CCT/colour and run length or an elevation and we translate it.
Sample & confirm
We confirm optics, throw, binning and mounting, and sample where the detail warrants it.
Manufacture
Your run is built, binned for colour consistency, and labelled private-label if required.
Test
Each run is powered and checked for output, beam and uniformity before it leaves the factory.
Pack & document
Reels, clips, profiles, connectors and fixings packed with install documentation.
Ship direct
Dispatched manufacturer-direct to your project in any of 50+ countries.
What architects and buyers ask about flexi wall washers
What is a flexible LED wall washer?
A flexible LED wall washer is a bendable linear fixture with lensed optics that throws an even beam up a surface the throw and beam control of an architectural wall washer in a soft, cut-to-length body. RHEA LED Linear has manufactured them since 2011 in side-bend, top-bend and 3D-bend geometries.
What beam angles are available?
10°, 30° and 45° are the core beams, in both symmetric and asymmetric distributions, with over 10 beam angles across the range. 10° grazes texture tightly, 30° is a medium wash, and 45° floods a wider plane. Throw is 1–10 metres depending on optic and output.
Are RHEA LED Linear wall washers waterproof?
Yes, they are manufactured in IP67 silicone-encapsulated profiles for façades, landscapes and wet exteriors, with IP22 options for interiors. The exact IP rating per profile is confirmed on quotation.
Can they bend around curved façades and columns?
Yes. The side-bend and top-bend profiles curve on one plane, and the 3D-bend profiles flex on multiple axes at once for domes, columns and free-form architecture without breaking the line of light.
What colours and control options are there?
Tunable white from 1800K to 6500K, plus RGB and RGBW, with dimmable, flicker-free operation and DMX512 control. Power options are 9, 18 and 19.2 W per metre.
Do you make OEM or private-label wall washers?
Yes, this is core to what we do. RHEA LED Linear builds wall washers to your drawing under your brand, including custom beam optics, private-label packaging and printed reels, and wall-wash engines embedded into your own fixture.
Do you sell manufacturer-direct to architects and project buyers?
Yes. RHEA LED Linear is the manufacturer, not a reseller so specifiers and buyers get factory pricing, direct technical support and direct shipping to projects in 50+ countries.
Send us the elevation. We’ll build the wash.
Share your beam, output, bend and run length or just the façade drawing. You’ll get a manufacturer-direct quote with MOQ and lead time, from the team that’s built linear, neon and wall-wash lighting since 2011.
Notifications
How may I help you today?